Vendeur: Audio Technica
Audio Technica ATHANC500BT Wireless Over Ear Headphones
Détails du produit
Audio Technica ATHANC500BT Wireless Over-Ear Headphones
The ATHANC500BT Wireless Noise Cancelling Headphones, these over-ear headphones make sure to cancel noise and bring a good noise reduction. Listening to music, videos, phone calls, in noisy locations, is such a ease with these headphones. These headphones have a feature in which you can switch the mode, allowing for you change from switchable hear-through which allows you to hear voices through your headphones.
A 40-mm driver with a high-fidelity audio reproduction. They use Bluetooth, touch controls built into the earcup for handling all calls. Music or volume adjustments. By Supporting the Audio Technica Connect app, they utilize a better improvement to hear or adjust settings with your device.
This kit comes with a 30 cm USB charging cable, a micro-USB cable, and a stereo mini plug.
Features:
Reducing Environmental Noise, with active noise cancelling.
When using Bluetooth and Noise-Cancelling simultaneously, you have a 20 hour battery life
The Sleek and swivel design make the headphones a must-have for travel due to them been lightweight.
Bluetooth connectivity
40 mm drivers for audio reproduction
a 30 cm USB Charging Cable
Specifications:
Type Active noise-cancelling Driver Diameter 40 mm Frequency Response 20 to 20,000 Hz Maximum Input Power 40 mW Sensitivity 96 dB/mW (When noise-cancellation used) 95 dB/mW (When noise-cancellation not used) Impedance 32 ohms Battery DC 3.7 V lithium polymer battery Battery Life Max. approx. 20 hours (when Bluetooth and noise-cancellation used) Max. approx. 42 hours (when only noise-cancellation used) Weight Approx. 180 g (6.3 oz) Accessories Included USB charging cable (30 cm (12“), USB Type-A/Micro USB Type-B) Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug, L-shaped) Microphone Type Electret condenser Microphone Polar Pattern Omnidirectional Microphone Frequency Response 50 to 4,000 Hz Microphone Sensitivity -36 dB (1 V/Pa, at 1 kHz) Charging Time Approx. 4 hours Operating Temperature 5°C to 40°C (41°F to 104°F)
Bluetooth® Output <4.0 mW EIRP Operating Range approx. 10 m (33’) Frequency Band 2.402 GHz to 2.480 GHz Modulation Method FHSS Compatible Bluetooth® Profiles A2DP, AVRCP, HFP, HSP Support Codec SBC Transmission Band 20 to 20,000 Hz
Audio Technica ATHANC500BT Wireless Over Ear Headphones, headphone, headphones, over ear, over, around, ear, around ear, audio, technica, audio technica, ATHANC500BT, ATHANC500, ATHANC500B, wireless, noise cancelling, noise, cancelling
Specifications:
Type Active noise-cancelling Driver Diameter 40 mm Frequency Response 20 to 20,000 Hz Maximum Input Power 40 mW Sensitivity 96 dB/mW (When noise-cancellation used) 95 dB/mW (When noise-cancellation not used) Impedance 32 ohms Battery DC 3.7 V lithium polymer battery Battery Life Max. approx. 20 hours (when Bluetooth and noise-cancellation used) Max. approx. 42 hours (when only noise-cancellation used) Weight Approx. 180 g (6.3 oz) Accessories Included USB charging cable (30 cm (12“), USB Type-A/Micro USB Type-B) Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug, L-shaped) Microphone Type Electret condenser Microphone Polar Pattern Omnidirectional Microphone Frequency Response 50 to 4,000 Hz Microphone Sensitivity -36 dB (1 V/Pa, at 1 kHz) Charging Time Approx. 4 hours Operating Temperature 5°C to 40°C (41°F to 104°F)
Bluetooth® Output <4.0 mW EIRP Operating Range approx. 10 m (33’) Frequency Band 2.402 GHz to 2.480 GHz Modulation Method FHSS Compatible Bluetooth® Profiles A2DP, AVRCP, HFP, HSP Support Codec SBC Transmission Band 20 to 20,000 Hz
Audio Technica ATHANC500BT Wireless Over Ear Headphones, headphone, headphones, over ear, over, around, ear, around ear, audio, technica, audio technica, ATHANC500BT, ATHANC500, ATHANC500B, wireless, noise cancelling, noise, cancelling



